Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties

Metal/ceramic composites are in high demand in several industries because of their superior thermo-mechanical properties. Among various composite types, the interpenetrating phase composites (IPCs) with percolating metallic and ceramic phases offer manifold benefits, such as a good combination of strength, toughness, and stiffness, very good thermal properties, excellent wear resistance, as well as the flexibility of microstructure and processing route selection, etc. The fabrication of metal/ceramic IPCs typically involves two steps - i) processing of an open porous ceramic body, and ii) infiltration of metallic melt in the pores to fabricate the IPC. Although significant progress has been made in recent years for developing both porous ceramics and melt infiltration methods, to the best of the knowledge of the authors, no review article summarizing all the aspects of processing and properties of IPCs has been published till date. This review article is aimed at filling this gap. Starting with a brief introduction about the current status and applications of IPCs, the various processing routes for fabricating open porous ceramic preforms and melt infiltration techniques have been discussed. Subsequently, the data available for various important physical, mechanical, and thermal properties for IPCs have been critically analyzed to thoroughly understand their dependence on various structural and processing parameters. To compare the properties of IPCs with other relevant materials, seven different Ashby material property maps have been used, and the domains for IPCs have been created in them. For each map, the concept of material indices has been employed to critically discuss how IPCs perform in relation to other material classes for various optimum design conditions. Finally, a detailed future outlook for further research on IPCs has been provided.     

Highly sensitive and wide-range flexible sensor based on hybrid BaWO4@CS nanocomposite

Flexible photoelectronic devices are in demand right now. In this work, a new family of biopolymer-based photodetectors is described. Chitosan (CS) was utilized as a safe, biodegradable host biopolymer, and nanostructured barium tungstate (BaWO₄) particles were used as the nanofiller of the biopolymer matrix to prepare flexible optical sensors. The co-precipitation process was used to produce the filler powders, which were then dried at room temperature without using any surfactants or hazardous solvents. The fabricated sensor showed high flexibility and sensitivity to UV/proton/alpha and laser irradiation. X-ray diffraction (XRD), XPS, FTIR, EDX-map analysis also confirmed the successful synthesis, related chemical binding, and elements in the nanocomposite structure. According to the TEM images, the average particle size of synthesized BaWO₄ NPs was obtained at about 110 nm. A considerable luminescence emission was observed in the constructed sensor's blue/green and ultraviolet spectral regions under various excitation sources. The developed sensor was nontoxic to the cells and provided soft, thin, antibacterial activity, flexible, and comfortable contact with skin, and promising ionizing ray detection applications in flexible optical sensors.     

Rare-earth free sensitizer in NaLuCrF4:Er upconversion material

Upconversion phosphors are known as a material system that can convert near-infrared light into visible/ultraviolet emissions by sequentially absorbing multiple photons. The studies on upconversion materials often use two rare earth (RE) ions as a sensitizer-activator pair. We investigated the influences on luminescence intensity depending on Cr-doping content (x) of hexagonal NaLu_0.98–xCr_xF₄Er_0.02 (x = 0–0.9) upconversion material by substituting Lu³⁺ ions with Cr³⁺in the absence of Gd³⁺. The change in upconversion luminescence intensity appears with saddle-like shape. We suggest that Cr³⁺ ions play the dual role as a constituent in host lattice and a sensitizer in the upconversion process. Optimal conditions for gaining the strongest upconversion emission correspond to x = 0.3–0.5, where there are effective energy transfers between Cr³⁺ and Er³⁺ ions and CrEr dimers. Apart from these values, the emission intensity decreases rapidly which can be ascribed to the absence of multiple-photon absorption for the case of low Cr³⁺ contents, and to the coupling between Cr³⁺ and/or Er³⁺ ions for the case of high Cr³⁺ contents. Magnetization and electron-spin-resonant measurements were performed to understand the correlation between the optical and magnetic properties.     

脉冲激光与电弧布置方式对铝合金焊接熔滴过渡与焊缝形貌的影响

以2219铝合金为基板，研究了不同脉冲激光-电弧布置方式下的熔滴过渡与焊缝形貌特征，分析了熔深增加的机理. 结果表明，当脉冲激光照射母材时，脉冲激光主要提供对母材的热输入，母材温度的增加有助于促进熔滴铺展，稳定熔滴过渡过程；当脉冲激光照射熔滴缩颈时，主要提供对熔滴的力输入，蒸发反力的作用下形成"一脉一滴"，显著提高熔滴过渡频率与熔滴飞行速度，增加了熔滴对熔池的冲击力，熔深增加；当脉冲激光交替的照射熔池和熔滴时，一方面能够对母材进行加热，有助于熔滴的铺展，另一方面能够提高熔滴过渡频率，提高焊缝的均匀性.     

重水浓度与吸光度关系曲线类型研究

重水作为反应堆的慢化材料，其浓度直接影响反应堆的安全和性能。为研究其重水浓度与吸光度间的关系曲线类型，基于朗伯-比尔定律，从理论上推导出液态重水中某种水分子的红外吸收峰分别与0~2种其他水分子的红外吸收峰发生重叠时重水浓度与吸光度间的关系式，分情况对二者之间的关系曲线类型进行讨论。采用傅里叶变换红外光谱仪，测得浓度为0.015%~99.98%（摩尔比）的重水标准样品吸收光谱，对重水浓度和吸光度间的关系曲线类型进行验证，理论推导与实际吻合。研究表明，一般情况下，宽浓度范围内，重水浓度与吸光度间的关系曲线类型为二次曲线；窄浓度范围内，关系曲线类型为线性。特殊情况下，吸光度为定值或关系曲线类型为线性。     

Extraction equilibrium conditions of beryllium and aluminium from a beryl ore for optimal industrial beryllium compound production

This study examines the extraction of beryllium and aluminium from a Nigerian beryl ore using Cyanex®272 in kerosene from an aqueous sulphate pregnant solution. Parameters such as extractant concentration and equilibrium pH that dictates the extraction yield were studied. Under the following conditions: temperature 27?±?2°C, phase ratio 1?1, about 45.50 and 46.76% of beryllium and aluminium were extracted by 0.15?mol?L^?1 Cyanex®272 concentration within 30?min. However, the extraction yield of beryllium and aluminium was increased to 91.68% and 97.89% at equilibrium pH of 3 and 4, respectively, for beryllium and aluminium at 27?±?2°C. A 0.05?mol?L^?1 H₂SO₄ solution was found to be adequate for the stripping of about 99.00% Be and 95.40% Al from the loaded organic phase. The pure solutions containing metal ions were accordingly beneficiated to obtain beryllium and aluminium compounds of industrial values.     

Oil Demand and Stocks

Current data of world oil demand. This includes international bunkers and refinery fuel. Updated on a monthly basis. Current data of oil demand from counties such as Canada, the United States of America, Japan, OECD Europe, Belgium, France, Germany, Italy, Netherlands, Spain, Sweden, the United Kingdom, Australia, Mexico, Republic of Korea, and Turkey. Updated on a monthly basis. Current data for crude oil and refined product stocks in Canada, Chile, Mexico, the United States (Western Hemisphere), France, Germany, Italy, Netherlands, Spain, the United Kingdom and Other Europe (Europe), Japan, Republic of Korea, Other Pacific (Asia-Pacific), and Total OECD (Table 12.1) Current data for refined product stocks in the OECD Western Hemisphere, OECD Europe, OECD Asia-Pacific and Total OECD. Products include gasoline, diesel and gasoil, and heavy fuel oil. Updated on a monthly basis (Table 12.2).     

On the Enzymatic Formation of Metal Base Pairs with Thiolated and pKa-Perturbed Nucleotides

The formation of artificial metal base pairs is an alluring and versatile method for the functionalization of nucleic acids. Access to DNA functionalized with metal base pairs is granted mainly by solid-phase synthesis. An alternative, yet underexplored method, envisions the installation of metal base pairs through the polymerization of modified nucleoside triphosphates. Herein, we have explored the possibility of using thiolated and pK_a-perturbed nucleotides for the enzymatic construction of artificial metal base pairs. The thiolated nucleotides S2C, S6G, and S4T as well as the fluorinated analogue 5FU are readily incorporated opposite a templating S4T nucleotide through the guidance of metal cations. Multiple incorporation of the modified nucleotides along with polymerase bypass of the unnatural base pairs are also possible under certain conditions. The thiolated nucleotides S4T, S4T, S2C, and S6G were also shown to be compatible with the synthesis of modified, high molecular weight single-stranded (ss)DNA products through TdT-mediated tailing reactions. Thus, sulfur-substitution and pK_a perturbation represent alternative strategies for the design of modified nucleotides compatible with the enzymatic construction of metal base pairs.     

Oxidation‐led decomposition of hexagonal boron nitride coatings on alloy substrates at 900 °C: Ti‐6Al‐4V

Hexagonal boron nitride (h‐BN) coatings on Ti‐6Al‐4V substrates undergo complete decomposition in air at 900 °C. This fate is similar to that of this ceramic material on chromia‐former alloys, and unlike that of a mass of powder treated in isolation. As the ceramic and alloy oxidize concurrently, outwardly diffusing aluminum (III) ions but not the predominant titanium (IV) ions react with the boron trioxide that forms around the h‐BN basal plane peripheries. Resultant aluminum borate is incorporated into the growing scale and the boron trioxide diffusion barrier is depleted. By this mechanism, the oxidation of h‐BN is maintained at an enhanced rate, until both this material and its oxide completely decompose. Liberated nitrogen from the oxidation of h‐BN can enter the underlying scale as a randomly distributed solute in rutile solid solution. The post‐coating oxide‐atmosphere interface comprises elongated aluminum borate crystallites protruding through at the boundaries between 3–5 at% nitrogen‐doped rutile grains. It differs significantly from that of oxidized, uncoated Ti‐6Al‐4V, which is occupied by a thin α‐alumina layer atop rutile. This interface does not change with an additional 72 h of heat‐treatment.